Campus Printing Services & Support

Provides instructions for printing on campus using PaperCut, including how to print, release print jobs, adjust settings, and access scanning, copying, and faxing features.

North Carolina A&T provides campus-wide printing through PaperCut, allowing users to print from university devices and release jobs at any supported campus printer.

All users will print to the following queue:

➡️ AggiesFollowMe_CampusPrinter

This service is available across academic buildings, residence halls, and student areas.

📎 Detailed setup and troubleshooting instructions are available in the guides attached below or by clicking here.

• Open your document
• Select Print
• Choose printer:
  ➡️ AggiesFollowMe_CampusPrinter
• Send your print job

 Important: Your document will be sent to the print queue, but it will not print until you release it at a campus printer. Users can print from both University Windows (PC) and Mac devices. Setup requirements may differ by device type.

• Go to any campus printer
• Log in using one of the following:
  • One ID credentials
  • Banner ID
  • AggieOne Card (Swipe) (coming soon)
• Select:
  ➡️ Print Release
• Select your document(s)
• Tap Print

• After logging in, you will see:

• Print Release → Release your print jobs
• Device Functions → Copying and faxing
• Scan → Scan documents to email

 Important: Your document will be sent to the print queue, but it will not print until you release it at a campus printer.

By default, printing is set to:

1. 🎨 Color
2. 📄 Single-sided (1-sided)

---

Change Settings at the Printer

Log in at the printer Select Print Release Select your document Adjust settings:

• Grayscale
• 2-Sided

Tap Print

---

Change Settings Before Printing (Recommended)

Select Print Open Printer Properties / Print Settings Change:

• Color → Grayscale (Black & White)
• 1-Sided → 2-Sided (Duplex)

Send your print job

  Copying

1. Log in at the printer
2. Select Device Functions
3. Select Copy
4. Adjust settings
5. Press Start

---

  Scanning

1. Log in at the printer
2. Select Scan
3. Choose Scan to Email
4. Confirm your email
5. Press Start

Important Note: Scans will be sent to your email.

---

  Faxing (If Available)

1. Log in at the printer
2. Select Device Functions
3. Select Fax
4. Enter recipient number
5. Press Start

• Ink and toner support for campus printers are available by clicking here.

• Print jobs remain in the queue for up to 1 hour if not released
• If not released within that time, the job will be automatically deleted
• Printer sessions will automatically log out after 30 seconds of inactivity
• You may need to log back in if the session times out before completing your task

• Print jobs will not print until released at a printer
• You can log in using One ID credentials or Banner ID
• AggieOne Card (Swipe) access will be available in the future
• Print jobs can be released at any campus printer
• Printing defaults to color and single-sided unless changed