Register Microsoft Authenticator as a Passkey
Secure your NC A&T OneID account with a device-bound passkey.
Overview
This article provides step-by-step instructions for North Carolina A&T State University students, faculty, and staff to register Microsoft Authenticator as a device-bound passkey for their NC A&T OneID account.
A passkey allows you to securely sign in using your mobile device's Face ID, fingerprint, screen lock, or PIN. This differs from a standard Microsoft Authenticator push notification or number-matching approval.
Who Should Use This Guide?
This guide is intended for members of the NC A&T community who use a university-issued OneID account. When prompted to select an account, choose your NC A&T OneID account rather than a personal Microsoft account.
Before You Begin
- An iPhone running iOS 17 or later, or an Android device running Android 14 or later.
- The latest version of Microsoft Authenticator installed on your mobile device.
- Your NC A&T OneID account added to Microsoft Authenticator.
- An existing approved authentication method or a Temporary Access Pass provided by IT.
- A device screen lock configured, such as Face ID, Touch ID, fingerprint, or PIN.
- Internet access on your mobile device.
You can review your registered authentication methods through the Microsoft Security Info Portal.
Open Microsoft Security Info Portal
Step 1: Open Microsoft Authenticator
- Open Microsoft Authenticator on your mobile device.
- Locate your NC A&T OneID account.
- If your account is not listed, select Add account (+), choose Work or school account, and sign in using your NC A&T OneID credentials.
- Select your NC A&T OneID account.
Step 2: Start Passkey Creation
- In Microsoft Authenticator, select Create a passkey.
- Complete identity verification using your existing approved authentication method, if requested.
- Follow the on-screen instructions to begin passkey registration.
Step 3: Configure Your Mobile Device
iPhone Instructions (iOS 17 or Later)
- Open your iPhone's Settings app.
- For iOS 18, navigate to General > AutoFill & Passwords.
- For iOS 17, navigate to Passwords > Password Options.
- Enable AutoFill Passwords and Passkeys.
- Under the available AutoFill providers, select Microsoft Authenticator.
- Return to Microsoft Authenticator to continue setup.
Android Instructions (Android 14 or Later)
- Open your device's Settings app.
- Search Settings for Passkeys or navigate to Passwords & accounts.
- Locate the setting for additional passkey providers or preferred passkey service.
- Select Microsoft Authenticator as the passkey provider, if available.
- Return to Microsoft Authenticator to continue setup.
Note: Android menu names may vary depending on your device manufacturer and operating system version. Follow the instructions displayed on your device.
Step 4: Complete Passkey Registration
- Return to Microsoft Authenticator and follow the remaining registration prompts.
- Approve device verification using your screen lock, biometric verification, or PIN.
- Wait for registration to complete.
- If you started from the Microsoft Security Info page, return to that page and verify that your passkey appears among your sign-in methods.
Step 5: Test Your Passkey
- Open a browser and visit Microsoft 365 using the button below.
- Enter your NC A&T OneID sign-in address.
- Select Sign-in options or Other ways to sign in.
- Choose the available passkey option.
- If prompted, select Microsoft Authenticator or the passkey saved on your mobile device.
- Complete verification using Face ID, fingerprint, screen lock, or PIN.
- Confirm that you successfully signed in.
Open Microsoft 365 to Test Your Passkey
Important: Keep another approved authentication method available until you have successfully tested your new passkey.
Troubleshooting
If you experience problems registering or using your Microsoft Authenticator passkey, review the following troubleshooting steps before contacting the Aggie Service Desk.
1. I do not see "Create a passkey."
- Confirm Microsoft Authenticator is updated.
- Verify your NC A&T OneID account is added.
- Confirm your device meets the requirements.
- Close and reopen Microsoft Authenticator.
- Review your available methods through the Microsoft Security Info Portal.
2. Microsoft Authenticator is not listed as a passkey provider.
- Verify Microsoft Authenticator is installed and updated.
- Review your device's AutoFill or passkey-provider settings.
- Enable Microsoft Authenticator as an available provider.
- Restart Microsoft Authenticator and try again.
3. Passkey registration fails or does not complete.
- Verify that your mobile device has internet access.
- Confirm your device screen lock is enabled.
- Complete all identity-verification prompts.
- Close and reopen Microsoft Authenticator.
- Check your Security Info page to determine whether registration completed before trying again.
4. I lost or replaced my mobile device.
Device-bound passkeys are associated with the device on which they were created.
- Use another approved authentication method if available.
- Register a new passkey on your replacement device.
- Contact the Aggie Service Desk if you cannot access your account using another approved method.
5. I selected the wrong Microsoft account.
Ensure you are registering the passkey for your NC A&T OneID account, not a personal Microsoft account.
- Open Microsoft Authenticator.
- Locate your NC A&T OneID account.
- Confirm you are using the correct university account during registration.
- If another account was selected, return to your NC A&T OneID account and restart registration.
6. My passkey does not appear as a sign-in option.
- Confirm passkey registration completed successfully.
- Review your registered methods through the Microsoft Security Info Portal.
- Verify you are signing in with your NC A&T OneID account.
- Select Sign-in options or Other ways to sign in.
- Contact the Aggie Service Desk if the passkey remains unavailable.
7. Face ID, fingerprint, or PIN verification is not working.
- Confirm your device screen lock is enabled and functioning.
- Try another available device verification method, such as your PIN.
- Review your device's biometric and security settings.
- Restart your device if the verification prompt is unresponsive.
8. I cannot complete identity verification.
Passkey registration may require verification using an existing approved authentication method.
- Try another registered authentication method if available.
- Verify your existing authentication method is working.
- Contact the Aggie Service Desk if you cannot complete identity verification.
The Aggie Service Desk can provide guidance on approved account recovery procedures and determine whether a Temporary Access Pass is appropriate.
9. My passkey works on my phone but not my computer.
- Confirm your computer and mobile device support the requested sign-in method.
- If prompted to use a passkey from another device, follow the on-screen instructions.
- Keep your mobile device nearby during authentication.
- Enable Bluetooth on both devices if required for cross-device authentication.
- Try another approved authentication method if the passkey cannot be used.
10. My passkey is registered, but I still cannot sign in.
- Confirm you are using your NC A&T OneID account.
- Verify your device has internet access.
- Confirm Microsoft Authenticator is updated.
- Try signing in using another approved method.
- Contact the Aggie Service Desk if the issue continues.
Security Reminder
Never share your NC A&T OneID password, device PIN, authentication codes, or Temporary Access Pass with another person. Only approve authentication requests that you initiated.
Need Assistance?
If you experience difficulties registering your passkey, configuring Microsoft Authenticator, or accessing your NC A&T OneID account, contact the Aggie Service Desk.
Phone: (336) 334-7195
Email: itservicedesk@ncat.edu
North Carolina A&T State University
Information Technology Services
Aggie Service Desk